Sensor Communication Interface (SCI™)

The SCI is a multi-configurable gas detection and monitoring solution to accurately and reliably detect hazardous gases, such as Ethylene Oxide (EtO), Hydrogen Peroxide (H₂O₂), and Peracetic Acid (PAA) throughout your facility.

Get a Quote

Product Features

The system is designed to communicate vapor readings in the most effective way for your business. The SCI can send data to a Programmable Logic Controller (PLC) or Business Management System to engage abatement systems or facility alarms, via 4-20 mA or Modbus. Alternatively, the SCI can send data with a ChemDAQ Data Acquisition System (DAQ®) for data logging, alarms and to display readings from up to 32 monitoring points at once to give you a holistic view of gas and vapor levels throughout your facility. 
per million (ppm). 

Seamless Communication

The SCI easily pairs with any ChemDAQ E-Cell Sensor including H₂O₂ or PAA

Intrinsically Safe Sensor Connections

The SCI can also be connected to Intrinsically safe sensors such as the EtO, oxygen and explosive gas sensors, via a barrier box using RS-485 communication.

Enhanced Connectivity 

The SCI also features two sets of signal relays to independently control external systems such as remote audio and/or visual alarms. The relays are triggered by the real time gas readings from whichever sensor is connected to the SCI. 

Compatible Products

Data Acquisition System (DAQ®)

ChemDAQ’s DAQ is an area monitoring and archival computer software solution. The DAQ can sync and centralize data from up to 32 monitoring locations simultaneously, compare all exposure data to occupational exposure limits, and provide historic reporting for each monitoring point.

Remote Display

Remote displays added to ChemDAQ monitors increase safety by warning employees of hazardous conditions before they enter the area. Display a single reading from a specific space on this easy-to-install display.

Remote Video Display

Remote video displays are an extension of your DAQ. The user can choose to highlight certain areas from their DAQ to display on this single, easy-to-read monitor.

Connect with a Product Expert

Ready to accurately and reliably detect chemical vapor levels using our SCI System? Connect with a safety expert today.

Sensor Specifications

Browse Other Monitoring Systems

SafeCide™ Series

Quickly and easily detect hazardous areas with the SafeCide series, a portable monitoring system to provide real-time measurements on the floor and easily identify hot spots and leaks. 

VaporAlert™ Series

ChemDAQ’s water-resistant monitoring system, the VaporAlert is specifically designed to continuously monitor PAA and H₂O₂ vapor levels in the wet areas of your plant. 

Steri-Trac® Series

As ChemDAQ’s premier fixed area monitoring system, the Steri-Trac series of products are designed to continuously measure and alert you to hazardous vapor levels in the air. 

Request a Quote