Easy Ref for ST 2,2+ Users Manual

Public Channel / Product Education

113 views
0 Likes
0 0

Share on Social Networks

Share Link

Use permanent link to share in social media

Share with a friend

Please login to send this presentation by email!

Embed in your website

Select page to start with

1. Easy Reference Guide for ChemDAQ’s Steri - Trac ® 2+ Area Monitor Gas - Type of Sensor , p. 17 Real - Time Gas Concentration Detected “ Heartbeat” Feature Blinking logo = Monitor system operational , p. 1 7 8 - Hour TWA * Average gas concentration for last 8 hours, p. 2 4 + 15 - Minute TWA * Average gas concentration for last 15 minutes, p. 2 4 + Sensor Serial # and Sensor Status Indicator, p. 1 8 Press MENU for configuration options, p. 1 9 A detailed explanation of the Home Display begins on p. 16 in the Basic User’s Manual . See p. 19 for a guide to the MENU system. See back for ALARM info. ➔ *TWA: Time - Weighted Average The Home Display Page numbers refer to Steri - Trac 2/ 2+ Gas Monitoring System User’s Manual (CM - 500 - A - 3 .00) .

2. Guide to Alarm Indications All page references in this Easy Reference Guide refer to ChemDAQ’s Steri - Trac 2/ 2+ Gas Monitoring System User’s Manual (CM - 501 - A - 3 .00) . You’ll find a detailed table of contents starting on p. 5 . Troubleshooting tables begin on p. 52 . Customer support is available through ChemDAQ’s Technical Services Department. Pulsating Alarm Beep...Beep...Beep Continuous Alarm Beeeep... LOW - Level Alarm HIGH - Level Alarm Low - Level Alarm: The real - time levels have exceeded the low - alarm threshold. The digits are displayed in yellow. The alarm horn emits a PULSATING alert. See pp. 22 +. High - Level Alarm: The real - time levels have exceeded the high - alarm threshold. The digits are displayed in red. The alarm horn emits a CONTINUAL alert. See p . 22 +. To silence the alarm horn , touch the area of the display showing the alarm. Once the horn is silenced, i t will re - alarm again after 15 minutes if gas concentrations remain at or above the alarm threshold. Re - alarm time is user - configurable. See p. 2 5 for details. ChemDAQ ® Technical Services Department TechService@Chemdaq.com 800.245.3310 x310 (Within U SA and Canada) 1. 412.787.0202 x310 (Worldwide) CM - 50 1 - B - 3 .00 , ©ChemDAQ ® Inc. 201 9 , All Rights Reserved

Views

  • 113 Total Views
  • 72 Website Views
  • 41 Embedded Views

Actions

  • 0 Social Shares
  • 0 Likes
  • 0 Dislikes
  • 0 Comments

Share count

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+